» Setting Menu List » Contents of the Menu Options » Timer Settings
|
Timer Settings
NOTE
About the menu options in the following chart
Default settings are highlighted in bold.
The settings marked with*A cannot be imported or exported via the Remote UI.
For values with "*1" mark, the default value varies depending on the country where you are using the machine.
For settings or values with "*2" mark, the setting or value may be unavailable or vary depending on the country where you are using the machine.
Time & Date Settings
Settings
Descriptions
Date Display Type
Select the date display format.
YYYY MM/DD, MM/DD/YYYY, DD/MM YYYY
12/24 Hour Clock
Select the time display format.
12 Hour (AM/PM), 24 Hour
Current Time Settings*A
Specifies the current time and date.
Time Zone Settings
Set the time zone.
GMT-12:00 to GMT 0:00 to GMT+12:00
Daylight Savings*2
Set the daylight savings time option.
Off*1
On: Start (M/W/D), End (M/W/D)
Sleep Timer
Set a timer to enter the sleep mode after the machine has been idle for a specified length of time.
We recommend that the default settings be used for this feature.
3 to 5 to 240 (minutes)
Auto Reset Timer
Set a timer to return to the default screen after copying is completed or when key operation is not performed for a certain period of time.
(0=Off, 1-9), 1 to 2 to 9 (minutes)
Screen After Auto Reset
Specify whether to display the default screen selected in "Setting the Default Screen" after auto reset is performed.
Default Screen, Selected Screen
Auto Offline Time
Specify a timer to return to the scanner offline mode after the machine has been idle for a specified length of time.
(0=Off), 1 to 5 to 60 (minutes)
0374-0JK